Oil-Coolant

Grid List

Set Descending Direction

3 Item(s)

  1. Billet Oil Fill Cap
    $78.00

    Out of stock

    These Billet Oil Fill Caps are machined from billet 6061-T6 aircraft alloy Multiple tapped holes allows for use both transverse and longitudinal engines Made to Fit OEM valves covers for VW and Audi cars only in machined finish (caps in lower part of pics) polished not available at this time Learn More
  2. SP 24V VR6 Oil Filter Housing
    $266.00

    The Schimmel Performance 24V VR6 Oil Filter Housing is the best upgrade available to protect the investment under your hood. The oem canister oil filter housing has a restrictive plastic anti-drainback valve that is flow restrictive. It is to prevent oil draining back into pan when engine is turned off. Using the Schimmel Performance oil housing will allow the use of spin on oil filters which have anti-drainback valves that have higher flow rate while running and gets replaced every oil change. It is designed to be used with the most common spin on oil filter thread 3/4-16”, allowing you to choose from over 20 different brands spin on filters including Bosch, Amsoil, Mobil1, Fram, Wix, ect. The oil filter housing comes with one high quality spin on Mahle oil filter or Amsoil as a upgrade Ports: qty 2- 1/8” NTP ( oil temp/pressure sensors) qty 1- M10 (oem sensor port) qty 1- -4AN clean oil port (Turbo Feed) The -4AN clean oil port is used to feed your turbo with fresh filtered oil. The OEM oil filter housing has two ports. These ports are unfiltered oil from the oil pan and are before the filter. If using any of the OEM ports for turbo oil feed, you are sending dirty oil to your turbo bearings which will drastically reduce its life and performance. Not only does the SP oil filter housing protect your engine, it makes changing your oil a much simpler task. No longer do you have to handle changing out the cartridge, worry about contamination of the oil filter housing, depositing lint or transfer from whatever rag or paper is used to wipe out the housing, or thinking you have cross threaded the cheap plastic filter housing since they don't fit all that well. Schimmel Performance’s VR6 spin-on oil filter adapter makes oil changes quick and easy. Fits 24v valve vr6 engines (2.8L and 3.2L) Rotating the Mocal thermoplate allows ports to adjust to where you need them Perfect for 24v swap into MK1,MK2,MK3 when front engine bracket is needed The SP oil filter housing comes with the following: 1. Oil filter housing 2. Stainless fasteners 3. Mahle spin on filter 4. Oem housing to engine block seals Learn More
  3. 24V VR6 Water Pump
    $68.00

    This water pump features a cast aluminum impeller Replaces oem pump that has a plastic impeller Fits 24V vr6 2.8 and 3.2L engines comes with oring seal Learn More

Grid List

Set Descending Direction

3 Item(s)